When you call about a heating or cooling problem, you want a straight answer about what the system probably needs, not a voicemail and a callback two days later. We pick up, ask about the equipment, and tell you what the visit covers before anything is scheduled. That is how every call works, whether it comes from a condo owner dealing with a unit that stopped cooling overnight or a property manager trying to keep a six-unit building comfortable through the week.
We handle the full range of heating and cooling work in Fort Lauderdale: AC repair and service, heat pump repair and installation, full system replacement, ductwork repair and sealing, thermostat and smart-control installation, indoor air quality and air filtration, whole-home dehumidification, and seasonal maintenance. Emergency calls are answered at any hour, any day, including weekends and holidays.
Call (954) 994-2465 to get started.
A quote for heating or cooling work comes after the system has been looked at, not before. What the fault turns out to be, how accessible the components are, and whether the right answer is a repair or a full replacement are the three things that move a price the most. A refrigerant leak that traces to a corroded coil is a different job from one that traces to a loose fitting. A blower motor that has seized is a different scope from one that is simply running slow. We do not quote a number before we know which one we are dealing with.
When you call, we scope the job on the phone as far as the symptoms allow, confirm the rate for the diagnostic visit, and set the appointment. After the visit, the findings are explained and the cost of any recommended work is given before anything is authorized. The diagnosis explained on every call is not a policy we announce. It is how the work gets done.
What does not change the quote is where you are in Fort Lauderdale or how long the drive takes. Coverage is coverage.
A system that is a few years into its useful life, running on equipment that is still in production, and presenting a fault that traces to one component is usually worth repairing. A capacitor, a contactor, a fan motor, a refrigerant charge issue, a failed thermostat: these are discrete problems with discrete fixes, and addressing them extends the life of equipment that still has years left in it.
The diagnosis tells us whether the fault is contained. If the compressor is intact, the coils are clean, and the ductwork is sound, a repair is usually the sensible answer.
A system running on a refrigerant type no longer in production is a different situation. Topping off the charge is a temporary fix on a system that will need the same fix again, and the refrigerant itself is increasingly difficult to source. A compressor that has already been replaced once, a coil that has corroded through, or a unit that has accumulated enough run hours to show wear across multiple components at once all point in the same direction.
In the Southeast's near-year-round cooling climate, systems accumulate run hours faster than they would almost anywhere else in the country. That changes the math on repair versus replacement compared with a region where the AC sits idle for six months. We work through that math on the visit and explain the reasoning before recommending a path.
Calls are answered around the clock, any day of the week. There are no after-hours restrictions, no closed hours, and no difference between a call on a Tuesday afternoon and one at two in the morning on a holiday weekend. Emergency calls, no-cool situations, and system-down scenarios get the same response at any hour.
For scheduled appointments, the visit is arranged on the call. If a property has tenants who need advance notice, or a business that cannot shut down for a repair window, we talk through the scope on the phone and work out what the schedule allows. Code-compliant HVAC work matters especially for commercial properties, where a return visit means closing down a space a second time.
Fort Lauderdale has a large stock of multi-unit residential and commercial properties, and we handle those alongside single-family calls. A property manager overseeing several systems at once can call about all of them on the same line.
Second opinions are a normal part of how people make decisions about expensive equipment, and we take those calls the same way we take any other. If someone has been told a system needs replacing and wants another set of eyes on it, we assess the equipment and explain what we find. If the first assessment was right, we will say so. If it was not, we will say that too.
We also take over work started by someone else. A repair that did not hold, a system that was serviced and started behaving differently afterward, or an installation that was left incomplete are all situations we can step into. The visit covers a full assessment of what the system is doing and what it needs, starting from the current state rather than from whatever was done before.
Permits handled where the job needs them apply to this work the same as any other. If the previous work required a permit and one was not pulled, that is part of what we talk through.
A duct system that is losing conditioned air to unconditioned spaces is running up the energy bill on every cycle the system completes. The AC cools the air, the duct loses it before it reaches the room, the thermostat keeps calling for more cooling, and the system runs longer than it should. In a region where the AC runs most of the year, that loss compounds quickly.
Duct leaks also pull humid outdoor air into the return side of the system. In a climate where outdoor humidity is consistently high, that means the system is fighting moisture it should not have to deal with. The result is higher indoor humidity even when the thermostat reads correctly, and conditions that work against indoor air quality.
A duct sealing visit involves pressure testing the system to measure how much air is being lost, locating the gaps in the supply and return runs, and sealing them. The work does not require pulling the house apart. Most of it is done through the existing access points in the system. The difference in comfort is usually noticeable within the first few cooling cycles after the work is complete. For a job in Fort Lauderdale, the page listing our HVAC services is a good starting point.
A maintenance visit is not just a filter swap. It covers coil cleaning on both the evaporator and condenser sides, a refrigerant level check, an inspection of electrical connections and contactors inside the unit, thermostat calibration, and an airflow measurement to confirm the system is moving air the way it should. Scheduling a tune-up before the heaviest cooling demand hits means the system goes into peak season with known-good components rather than ones that have been running unexamined. For property managers, a maintenance schedule across multiple units is something we can talk through on the call.
Gas heating equipment in this region is uncommon, but it exists, and when an ignition system or flame sensor fails, the unit will not light or will shut down on a safety fault. A flame sensor that is coated with residue reads as no flame even when combustion is happening correctly, which causes the system to cycle off immediately after startup. The fix is usually straightforward once the fault is confirmed, but the diagnostic matters because a no-heat call can have several causes that look the same from the thermostat.
Uneven temperatures from room to room in a larger property often trace back to how air is distributed through the register and vent layout rather than to the equipment itself. A register that is partially blocked, a damper that has shifted, or a supply run that was never sized correctly for the space it serves can all produce the same symptom. Rebalancing the system means adjusting airflow at the register and damper level so that conditioned air reaches each space in the proportion the layout calls for. You're talking to someone who knows the area and the systems in it.
A standard AC system removes some moisture as part of the cooling cycle, but it is not designed to control humidity independently. On mild days when the system does not run long enough to pull meaningful moisture from the air, indoor relative humidity can stay high even when the temperature reads correctly. A whole-home dehumidifier connects to the existing air handler and duct system and operates on its own schedule, keeping humidity in a range that discourages mold growth and keeps the air comfortable regardless of whether the cooling is actively running. For properties where humidity is a persistent complaint, this is a more targeted fix than running the AC harder.
We cover Fort Lauderdale and the surrounding areas in Broward County, including Wilton Manors, Lazy Lake, Franklin Park, Roosevelt Gardens, and Washington Park. Whether the property is in the middle of Fort Lauderdale or in one of the communities nearby, the call process and the work are the same. If you are not sure whether your address falls within the area we cover, call and we will confirm it.
We work on single-family homes, condos, multi-unit residential buildings, and commercial properties. Fort Lauderdale has a large stock of apartment buildings and small commercial spaces, and we handle those on the same call process as a residential job. Property managers overseeing multiple systems can call about all of them on one line.
A portable dehumidifier handles one room at a time and requires manual emptying or a drain connection. A whole-home unit connects directly to the air handler and duct system, treating air throughout the property on every cycle. It also operates independently of the cooling cycle, so it continues pulling moisture from the air on mild days when the AC is not running, which is when indoor humidity tends to climb the most in this region.
Call us and describe what the system is doing now compared with what it was doing before the repair. We assess the current state of the equipment and explain what we find, starting from where things stand rather than from what was done previously. If the original repair was correct and something else has developed, we will say so. If the fault was not fully resolved, that will come out in the diagnostic.
Yes, with the understanding that a tune-up on an aging system is about keeping it running reliably for the remainder of its useful life, not about restoring it to like-new performance. A maintenance visit on an older unit still covers coil cleaning, refrigerant level, electrical connections, and airflow, and it often surfaces problems before they become failures.
Yes. The work area is left in the condition we found it. Removed equipment is taken away, and any materials or packaging from the new installation are cleared before the job is closed out.
We cannot guarantee which person will be sent on any given visit, and we do not make that promise. What we can tell you is that the job is documented and the findings from the first visit are available so that whoever comes out for the follow-up has the full picture.
Often yes. When you call, the person who answers will ask about the symptoms, the equipment, and how long the problem has been happening. That conversation helps scope the visit and sometimes points clearly at one or two likely causes before anyone arrives.
Not necessarily. Call us with the address and we will confirm whether we cover it. Boundaries between towns do not always match the way we organize service, and many properties right on a line are within the area we work.
When you call (954) 994-2465, we will ask about the equipment: what it is doing, what it has done recently, and whether there have been any previous repairs.
By the end of the call, you will have the rate for the visit confirmed and the appointment set.
Call Tamarac HVAC Company at (954) 994-2465 any hour, any day.
Local service. Reliable systems. Costs set out on the call.
Just as close, we take heating and cooling work in: Oakland Park, Lauderdale Lakes, Lauderhill, Dania Beach, North Lauderdale.
Every call starts the same way: we scope the job on the phone, explain what the diagnostic covers, and confirm pricing before anything is scheduled. The table below lays out the full range of heating and cooling work we handle in Fort Lauderdale and across Broward County, who each service fits best, and a practical note worth knowing before you book. If a service you need is not listed or you are not sure which one applies, call us and we will work out what it needs.
| HVAC Service | Scope of Work | Best Suited For | What to Keep in Mind |
|---|---|---|---|
| Seasonal Maintenance & Tune-Ups |
| Homeowners who want to catch problems before the peak cooling season rather than during it | In Fort Lauderdale, the practical window for a spring tune-up is before the heat builds in earnest, when the system has not yet been running at full load for months. |
| High-Efficiency Central AC Replacement |
| Homeowners with older systems, rising energy bills, or units running on refrigerants no longer in production | In a home where the AC runs most of the year, a higher SEER rating compounds savings over a long cooling season. The difference shows up on the monthly energy bill. |
| HVAC System Installation & Replacement |
| Homeowners replacing an aging system, a failed compressor, or a unit running on a discontinued refrigerant | Oversizing is as much a problem as undersizing. A unit too large for the space short-cycles and leaves humidity problems behind, which matters especially in South Florida. |
Call us for a quote and we will scope the job on the phone, explain what the visit covers, and confirm pricing before anything is scheduled.
(954) 994-2465